The Ei168 has built in circuitry to aid suppression of voltage transients and RF interference."/>
Quick Search     
  • Home Page
  • About Us
  • Contact Us
  • Customer Help
 
Browse by Category
Essentials Range
Browse by Category

Credit Cards Accepted
Essentials Products - At Discount Prices

Aico Ei168RC RadioLINK Multi-Repeater Interconnect Base For Ei2110 Multi-Sensor, Ei160RC & Ei140 Series Smoke & Heat Alarms 240V

Ei168RC

Aico Ei168RC RadioLINK Multi-Repeater Interconnect Base For Ei2110 Multi-Sensor, Ei160RC & Ei140 Series Smoke & Heat Alarms 240V Check Out Our Best Bargain Monster Deals
Our Price
£30.88 exc VAT
Quantity

Our Price £37.06 inc VAT

List Price £57.96 inc VAT

You Save £17.42 or 36.07%

Availability
Normally despatched within 1-2 working days


Normally despatched
within 1-2 working days

Manufacturer Information


Code Ei168RC

Aico Ei168RC RadioLINK Multi-Repeater Interconnect Base For Ei2110 Multi-Sensor, Ei160RC & Ei140 Series Smoke & Heat Alarms 240V

The Ei168 RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF signal from another Ei168 Base, the attached alarm will sound. It therefore eliminates the need to install long interconnect wires between all the alarms on different floors in different rooms.

The Ei168 RadioLINK Base is designed for use with the Easi Fit range of mains powered alarms. The Ei168 itself is also mains powered and has rechargeable lithium cells for back-up in the event of mains failure.

The Ei168 base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The alarm is then slid onto the base rather than to its mounting plate. As many as twelve units can be interconnected in this way.

The RF range can be extensively improved by either adjusting the wire antenna or by converting the base into a repeater" i.e. re-transmission of the RF signals.

The Ei168 has built in circuitry to aid suppression of voltage transients and RF interference.

Specification

Main Features

Mains Powered

Designed for use with the EasiFit range

RF range 150 metres(minimun) in free space

Innovative Incremental RF Signal Range through Repeater software

Uniquely coded to work with one system only

Advanced suppression and calibration technology increases reliability

Low power cell warning in the event of a cell failure

10 year Rechargeable Lithium Cell Back-up

Wireless interconnect with up to 12 other units

5 year guarantee


Applications

The Ei168 RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF alarm signal from another Ei168 Base, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms.

It is designed for use with the EasiFit range of Mains Powered Smoke/Heat Alarms. The RadioLINK Base itself, is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure. The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK Base rather than to its normal mounting plate. As many as 12 units can be interconnected in this way.

Downloads

Get Adobe ReaderYou may need Adobe Reader to view some of our downloads. If you do not already have it installed please click the icon to the left to install it