CP Electronics PIR Occupancy Switches
Presence and absence detectors provide automatic control of lighting, heating and ventilation.
CP Electronics range of presence and absence detectors can help reduce energy consumption by automatically turning off lighting, heating or ventilation that is needlessly left on. They can also contribute to public and workforce safety by automatically illuminating dark corridors and stairwells, for example.
The EBDSPIR presence detector is designed to provide automatic control of lighting, heating or ventilation loads. The detector can be mounted either flush into a ceiling tile or using a surface mounting box.
These compact surface mounted PIR detectors from CP Electronics provide automatic control for lighting, heating and ventilation loads. No external control boxes are required as the unit is self contained.
The EBMPIR-MB-PRM miniature batten mount PIR presence detector from CP Electronics provides automatic control of lighting loads. It has been specifically designed for mounting onto a batten style luminaire allowing retrofit upgrades to existing lighting systems. The unit is IP65 rated.
The SPIR range of rugged presence detectors are easy to install onto a single gang standard switch box.
The MWS6 is a mid-range microwave presence/absence detector for the automatic control of lighting, heating and ventilation. This detector has a low profile design which allows flush mounting into a ceiling tile, or surface mounting using a detector back box. Its reduced head size makes it unobtrusive to occupants.
The GESM is a surface mounted movement sensor with easy push button set up, that provides auto on/auto off switching designed to provide automatic control of lighting, heating or ventilation loads. When an area is occupied, lighting is only switched on when the level of natural light falls below a preset level.
The GEFL is a low profile, flush mounted movement sensor that provides auto on/auto off switching, is designed to provide automatic control of lighting, heating or ventilation loads. It detects movement using a PIR sensor and turns the load on. When an area is no longer occupied the load will switch off after an adjustable time out period.
The GIMB miniature PIR movement sensor provides auto on/off light switching. It is specifically designed for mounting, with a 1000mm cable length, onto a batten style luminaire. It is IP65 rated and therefore suitable for outdoor use as well as wet and damp areas.