Free Deliveryon orders over £50.Additional charges may apply for deliveries to zone 3 & 4.
COVID-19 update - We remain open and are despatching orders whilst observing Government guidelines
The minimum purchase order quantity for the product is
Normally despatched within 3-4 working days
Notify Me When Product Is Available...
You have successfully subscribed to this product
Cutting Compound is an oil based thread cutting compound formulated for use with both hand and power tools. It is ideal for drilling, thread cutting, milling, turning and hacksawing on a wide range of metals. It is excellent on stainless and other tough steels. Its formulation has been found to minimise tearing, tool wear and the effort required. Temaxol flows readily on the work and is easy to apply with a small brush. Temaxol should be applied to the drill, tap or bit when drilling, tapping or milling, and to the work piece when turning or hacksawing.
Temaxol should be applied sparingly with a brush. If heat is generated, then fumes will be evolved, allow adequate ventilation. Hands and hair should be kept clear of any moving parts of any equipment. Do not apply when equipment is moving.
In normal use it is advised that a suitable barrier cream be used to protect the skin from mineral oils which could trigger dermatitis on sensitive skins. Avoid use in confined spaces with no ventilation.
Temaxol Cutting Compound is a yellow greasy substance with the consistency of soft butter. It should not be runny unless stored in temperatures in excess of 400°C. Temaxol is flammable if exposed to extreme heat, but in normal use should not present any greater hazard than lubricating oil with a flash point in excess of 2000°C.